Lights, Lamps and Bulbs

One of the better, more convenient inventions in lighting came with the use of the touch lamp, which eliminated the need for a switch with which to turn a light on and off. While useful in turning it off, a touch lamp is more advantageous to turning it on to eliminate the need to fumble in the dark searching for the switch.

Even a three-way lamp allows the adjustment to be made through touch lamp technology as successive touches take the touch switch through the consecutive stages of brightness. It is the change in capacity when your body comes into contact with the touch-sensitive switch built as part of the lamp that triggers the switch to open, turn off the lamp, or close, and turn it on.

There are other types of touch sensitive switches also in use such as in elevators or door operators. Temperature switches use the difference between the temperature of a human hand and the ambient temperature of a switch’s surroundings to change the circuit. Early versions of the touch lamp experimented with temperature difference switches, but a person with cold hands could not control the light.

Resistance Can Create Shocking Consequence

Another type of touch lamp switch that did not work out too well relied on resistance to complete a circuit. The body made of largely of water is a good conductor and two contacts placed close together could have the circuit completed by touching them with your finger. This, however proved unpopular as a touch lamp due to occasional circumstances, which created a small electrical shock.

If you ever used a radio with an antenna, you have probably experienced an improvement in reception when you touched the antenna, as your body serves as an antenna as well. A touch lamp using radio frequency could detect the reception improvement when touched and operate the on and off switch. However, this method is also unreliable for lamp use.

Capacitance describes the lamp’s ability to hold electrons in storage, hence the term capacity and when you touch the lamp it increase the amount, or the capacity, of electrons the lamp is capable of holding. The touch lamp circuit can detect that difference and triggers the movement of the switch. The three-way switch simply adjusts the capacity by a percentage of power applied.

Similar circuitry is used to activate switches on other devices as well, such as loud noises enabling voice commands to activate switches to turn items on and off.

Those of us that have drive ways, lawns and gardens need lighting in order to enable visibility at night and also for protection purposes, as robbers will think twice to attack a well lit place however they may be tempted by a house that is in complete darkness. Here are how with the light lamp post you can have the light you desire at the right price.

Use The Solar Energy

The best investment you can do today is in solar energy as the prices of electricity has gone up and any extra bulb in the house can cost more then you would like to pay especially if you have a few lamp posts outdoors in order to ensure proper lighting facilities.

You can find solar powered lamp post in all major department stores such as, Home Depot, Wal-Mart and Sears to name only a few; many people today have switched to solar energy especially for outdoor lighting. Solar lamp post don’t need any installation as they get charged during the day from the sun and will be bright and shinning during the whole night its energy; you can place them along the walk path to the house, in the garden to watch over your flowers and for proper lighting and safe keeping.

Find great solar post lamps at Amazon.com (Click Here!)

Other Types Of Lamp Post

There are the regular lamp posts with which you can save too if you place florescent bulbs which are energy sabers instead of the normal bulbs. There are many advantages of using florescent lighting and they are: brighter light, longer bulb usage and smaller electricity bills. Some of the best florescent light bulbs are made by Phillips and come in economy packs of 5 and 6 on which you will save yet again.

A lamp post can be as tall or short as you need it to be depending on which part of the lawn, garden or drive way you place it. The hardest work is the wiring part for which you may need to hire professional help in order to get the job done right and the wires installed in the right manner so they don’t turn to be a hazard to you and your family.

There are many types of lamp posts to choose from therefore you shopping will be easy and fast and you can find them at home improvement stores such as Home Depot and/or Lowe’s as well as other department stores.

FInd great deals on post lamps at Amazon.com (Click Here!)

Helpful Tip

It is important you light your driveway, garden and lawn well in order to protect you home and family for any potential burglars when you are at home or away; lamp posts can be set to turn on automatically even when you are away, that way your home will be always lit and safe.

The fragrance lamp is sometimes also known as the fragrance lampe and, is a catalytic diffusion lamp that can impart fragrance while also providing pure air at the same time. The advantage of using fragrance lamps is that they can effectively do away with as much as 85% of bacteria present in a room for 30 hours after initial operating ends. Modern usage has allowed it to find use in new applications in the home as well as in offices.

One may begin the fragrance lamp’s process by lighting a stone burner situated at the mouth of the lamp and, in a few minutes, the flame is extinguished though the heated burner remains in action as the catalytic combustion burns up the fuel.

How It All Began And Where It Has Led To

The fragrance lamp was patented by Maurice Berger in Paris in the year 1898 and, thus was formed the name Lampe Berger. In the early 1900s, the Lampes were useful in helping with hygiene and, so were found in many hospitals as well as mortuaries due to the fact that these fragrance lamps could purify the air, which was its main selling point. During these times, the fragrance lamps used methyl alcohol that gave off formaldehyde when combusted and, was efficient though, the smell was somewhat unpleasant.

Maurice Berger sold his company in 1927 to Jean-Jacques Faillot who began the use of ethyl alcohol that smelt of apples when combusted and, thus moved the Lampe Berger Company into the consumer segment and, this meant that the fragrance ability became more important. This led to Faillot collaborating with many bottle designers and, sold as many as 20,000 lampes each year and, even began exporting them which met with mixed success.

Sales of these fragrance lamps fell during World War II and Faillot himself died due to being knocked down by a German military vehicle in Paris and, the company fell into the hands of his son, Gilbert. Nevertheless, by 1973, the Lampe Berger Company had begun to produce 80,000 fragrance lamps each year and, these were being exported around the world. The popularity of fragrance lamps increased through the 1990s especially in the United States and, spread to the east as well as other parts of the country.

The number of companies making fragrance lamps increased and, companies in far off China also jumped into the fray. At present, fragrance lamps have become a fast growing segment of the home fragrance and air purification market.

The season of winter can sometimes be a very depressing time of the year. Depression-like symptoms can be triggered due to the lack of sunlight coupled with the experience of continual rain or snow. Often, during these times of inclement weather, an individual is forced to stay indoors. Sometimes this condition is known as cabin fever or, more scientifically, can be labeled as Seasonal Affective Disorder.

A treatment that has shown promise in treating Seasonal Affective Disorder is through the use of a sun lamp. In addition to this particular disorder other individuals with certain conditions have benefited from the use of a sun lamp. Those other conditions have included individuals who experience non-seasonal related depression and those who are homebound for a number of reasons.

Find a great selection of sun lamps at Amazon.com (Click Here!)

What Is A Sun Lamp?

A sun lamp is an electrical device that simulates sunlight by emitting the short wavelengths found in the ultraviolet spectrum. A sun lamp receives its power through a 120 volt outlet. Also, sun lamps come in various sizes and can include a standing sun lamp as well as those that rest on a tabletop.

In addition, an added feature on some sun lamps is a timer. This timer, once set, will safely control the therapeutic time spent under than the sun lamp.

It is also important to note that there are a variety of light bulbs that are used in the light generating process. These bulbs come in different wattages. It is important to select the right wattage to meet your needs and maintain your personal safety. Also, these light bulbs will share with the consumer the number of hours of production that the bulb is estimated to provide.

Treatment Process

The treatment process in the utilization of a sun lamp involves the individual sitting or lying in proximity of the light generated from the sun lamp. The distance between the individual and the sun lamp should reflect a distance of no less than 18 inches. Often, treatments begin with sessions of 30 seconds and continue to progress in length. Generally, treatments occur on a daily basis and sometimes range in duration of up to 30 minutes.

It is critical that the eyes of the individual utilizing the sun lamp are protected. Therefore, it is not uncommon to have a set of protective eyewear included in the purchase of a sun lamp from the manufacture.

Skin Disorders

In addition to helping treat the symptoms related to Seasonal Affective Disorder, there are other medical benefits derived from the use of a sun lamp. One of these benefits is the effect that it can have upon certain skin disorders. Specifically, the treatment of acne, through the use of a sun lamp, has shown promise.

Find a great selection of sun lamps at Amazon.com (Click Here!)

Other benefits of sun lamp treatment may include other conditions that are related to depressive states. Those conditions include Alzheimer’s disease, eating disorders, post-partum depression, etc.

Also, the use of a sun lamp has provided benefits to those individuals who experience sleeping disorders.

It has been noted that even hurricane strength wind should not be able to extinguish the light of a hurricane lamp, especially with the glass chimney in place. Typically, they hold a candle, work as an oil lamp or contain an electric light adding ambience to your home’s décor and not necessarily a source for brilliant lighting.

Whether hanging on a wall or standing on a table, a hurricane lamp is not normally known for being an effective light source, however they do day add beauty and a unique addition to any decorative scheme. Their soothing circle of light cast on a table or over a small area by a hurricane lamp will also function as a stress-relieving center for a quiet evening around the house.

They can be found in a variety of styles and materials, with brushed metal being the most prominent, but with old world style and charm, they can found made of brass, ceramic and even clear quartz crystal. The main qualifications to be considered a hurricane lamp is to have what appears to be an oil reservoir, a light source and a chimney to protect the light from winds.

Shop for hurricane lamps at Amazon.com (Click Here!)

Works Well For Outdoor Decorating

A hurricane lamp can fit into your outdoor decorating as subdued lighting on a patio table or a picnic table during evening outings and some folks fill them with mosquito repellant oils to keep the bug count reduced during outdoor activities. This way they serve not only a comfort purpose but also supply limited lighting.

You can find a hurricane lamp at garage sales, estate sales and even at discount sales in a style that will be sure to fit what you are looking to accomplish. Be careful in selecting a hurricane lamp that uses oil, however to ensure they are safe for use. Cracks in an oil reservoir could be a fire hazard and care must be taken to insure you inspect a used hurricane lamp for safe operation before lighting the flame.

Shop for hurricane lamps at Amazon.com (Click Here!)

Over time, if oil is used in a hurricane lamp the glass chimney will need to be cleaned to remove soot and other dirt, which can dull the flame and make it appear less brilliant than it actually is. By keeping the chimney clean, you will always have an even light being spread through the immediate area. You should also maintain the wick on an oil burning lamp to make sure it is ready for every use.

When working on small, intricate details a good magnifying lamp can make a world of difference in your ability to see what you are trying to accomplish. The magnifying lamp will typically have a circular light source surrounding a magnifying glass, which enables you to direct light directly at the point at which you are focusing your work.

They are used in a wide variety of applications from industrial use, in correcting metal dies for example, or in fine detail painting by hobbyists. A magnifying lamp can be used by tailors and crafts persons who perform a lot of detail painting or embroidering and need a little extra light for working in close conditions.

Many are mounted to a swing arm and have a pivot at the attachment so the magnifying lamp can be adjusted to place the light and magnifying lens precisely where they are needed. They can also be helpful for those with failing eyesight who may need some extra brightness and a magnifying lamp can help with a host of vision issues.

Find a cool magnifying lamp at Amazon.com (Click Here!)

Precision Work Requires Project Magnification

Whenever a project involves intricate detail and precision work, a magnifying lamp will make the work easier to accomplish. Caution is advised, however as the first few times working with a magnifying lamp may be a little tricky until you learn how the enlarged version of what you are working on appears under the magnification.

For those who absolutely must get their head into the job, there is a magnifying lamp built into a headset, worn like goggles containing magnifying glass as a light source to illuminate and magnify without any distracting side images. These are recommended for low light areas where precision work is mandatory.

There are also hand held magnifying lamp units that can be held in one hand and useful for reading the fine print on many things. The small lamp lights a limited area and may not be the best unit for fine detail projects, but for reading fine print on labels or instructions, may come in handy.

The helping hands magnifying lamp unit also boasts the help of alligator clips to hold small work while illuminated by lights under a circular magnifying glass. This type unit is great for the hobbyists who can often use an extra pair of hands, or at least a couple of extra fingers to hold pieces in place while needing two hands for sanding or gluing.